VHF

AiM1

The narrow band AiM1 transceiver offers a low power, reliable data link in a Radiometrix transceiver standard pin out and footprint. The AiM1 is a frequency programmable, narrowband design, suitable for licensed and unlicensed VHF allocations, FCC part 90, part 95 (MURS) operation, and the 2M amateur band.

BL118

Bi-directional low power RF Remote Control application boards

These simple application boards use firmware based on the BD118 remote control systems to implement a bi-directional control link.

DXT / DXR

hese simple application boards use the firmware and signalling protocols of the existing CTX/CRX module products, interfaced with a choice of SIL package radio modules. A single relay output is provided, controlled by a pair of logic (or switch) inputs on the transmitter. Latched or momentary operation are selectable.

ENR1

12.5kHz Channel VHF receiver

The ENR1 is a miniature PCB mounting VHF radio data receiver. It is a narrowband 12.5KHz spacing receiver incorporating a received signal strength indicator (RSSI). It allows the simple implementation of data links at speeds up to 5kbps.

ENT1

12.5kHz Channel VHF High Power TX

The ENT1 transmitter modules offer a 100mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint.

ENX1

12.5kHz channel NBFM VHF Transceiver

The ENX1 is a 12.5kHz channel NBFM Transceiver module and it offers a 100mW RF output VHF data link in a DIL pin-out and footprint.

LMR0

The LMT0 transmitter and LMR0 receiver modules offer a 10kHz channel spacing multi channel, low power, and reliable HF data link

LMR1

VHF NBFM Low Cost multi channel radio receiver

The LMT1 transmitter and matching LMR1 receiver modules offer a multi channel, low power, and reliable VHF data link

LMT0

The LMT0 transmitter and LMR0 receiver modules offer a 10kHz channel spacing multi channel, low power, and reliable HF data link

M48-144-SHX1

he M48-144-SHX1 presents M48 modem IC combined with a SHX1 radio module and suitable interface circuits, power supplies, connectors to provide a complete RS232 radio modem interface. Optionally, the board can be housed in an EAS120 extruded aluminium housing