Multichannel

PLT2

NBFM Multichannel Data Packet Link Transmitter

The PL modules use the hardware of the existing LMT/LMR transmitter receiver pair, combined with
completely new firmware to produce a simple to use but readily controllable data link

QPT1

VHF Narrow Band FM 2 Watt Multi-channel transmitter

• Aluminium extruded casing, or smaller footprint PCB mounted shield can.

• Suitable for licensed & unlicensed VHF allocations, FCC part 90 operation

• With LMR1 or RX1M receiver over 10km range achievable (with suitable antenna)

QPX1

2 Watt Multi-channel VHF Transceiver

• 2 watt RF output VHF radio link

• Robust aluminium extruded casing.

• Multi-channel, narrowband design

• Suitable for licensed and unlicensed VHF allocations, FCC part 90 operation, and the 2M amateur band.

RDL2

UHF Multi Channel Wide Band FM Transceiver

RDL2 is a half-duplex multi channel wideband FM transceiver in a BiM series footprint and operates on 433.05-434.79MHz European SRD band.
This makes the RDL2 ideally suited to those low power applications where low cost multi-channel operation is required.

RLC2H

UHF Narrow Band FM Low Cost multi channel radio receiver

• low power, reliable data link in an industry standard pin out and foot print

• Usable range over 500m (paired with TLC2H Transmitter)

RMX2

Narrow Band Direct Interface Multi Channel Transceiver

The RMX2 is an ETSI EN 300 220-3 compliant UHF FM narrow band semi-duplex radio data module. It is a high performance ransceiver designed for use in industrial applications requiring long range, high performance and reliability.

RX1M

VHF Narrow Band FM Multi channel radio Receiver

The TX1M transmitter and RX1M receiver modules offer a low power, reliable VHF data link in an industry-standard pin out and footprint

RX2M

UHF Narrow Band FM Multi channel radio Receiver

The RX2M receiver and TX2M transmitter modules offer a low power, reliable data link in an industry-standard pin out and footprint

SAR3

The SAR3 is a miniature PCB mounting UHF radio data receiver. It is a narrowband 25KHz spacing receiver incorporating a received signal strength indicator (RSSI) and 4 channel capability.

SFX2

The SFX2 transceiver module offers a 500mW RF power output in the UK 458MHz band.