The UHF RX2G radio receiver and TX2A transmitter pair which enable the simple implementation of a wireless data link at up to 64 kbps at distances up to 75 metres in-building and 300 metres open ground.
The COR3 is a 25kHz channel narrowband receiver intended for European 868MHz band Non-Specific SRD applications. The module offers a low power, reliable data link in an industry-standard pin out and footprint.
The ENR1 is a miniature PCB mounting VHF radio data receiver. It is a narrowband 12.5KHz spacing receiver incorporating a received signal strength indicator (RSSI). It allows the simple implementation of data links at speeds up to 5kbps.
The MSR3 is a 25kHz channel narrowband receiver intended for European 868MHz band Non-Specific SRD applications. The module offers a low power, reliable data link in an industry-standard pin out and footprint.
The 10kHz channel NBFM NTX0 transmitter and NRX0 receiver operate on the licence exempt 27MHz SRD HF allocation. These modules offer a low power, reliable data link in a Radiometrix SIL standard pin out and foot print
The PL modules use the hardware of the existing LMT/LMR transmitter receiver pair, combined with completely new firmware to produce a simple to use but readily controllable data link
The RX3G is a PLL synthesiser based miniature PCB mounting UHF radio data receiver. With the matching TX3B-869-64 transmitters, RX3G allows the simple implementation of wireless data links at speeds up to 64kbps and distances up to 75 metres in-building or 300 metres over open ground.
The SAR3 is a miniature PCB mounting UHF radio data receiver. It is a narrowband 25KHz spacing receiver incorporating a received signal strength indicator (RSSI) and 4 channel capability.
